MF
Reinforced hollow-fiber microfiltration
Reinforced hollow-fiber MF membrane, and curtain modules SY-MF-1, SY-MF-2, and SY-MF-3. For suspended solids and biological duties ahead of, or inside, a membrane system.

Hollow-fiber curtain modules
| SY-MF-1 | SY-MF-2 | SY-MF-3 | |
|---|---|---|---|
| Type | Curtain | Curtain | Curtain |
| Average pore size | 0.1 μm | 0.1 μm | 0.1 μm |
| Membrane area | 5.4 m²/unit | 10.7 m²/unit | 35 m²/unit |
| Dimensions | 1125 × 480 × 25 mm | 1500 × 680 × 30 mm | 2000 × 1250 × 30 mm |
| Dry fiber packaging weight | 4 kg/sheet | 6.2 kg/sheet | 14 kg/sheet |
| Sealing adhesive | Polyurethane | Polyurethane | Polyurethane |
| Support rod | SUS304 | SUS304 | SUS304 |
| Collector pipe | ABS | ABS | ABS |
| Membrane material | PVDF | PVDF | PVDF |
| Average design flux | 15–20 LMH | 15–20 LMH | 15–20 LMH |
| Recommended operating temperature | 10–40°C | 10–40°C | 10–40°C |
| Maximum tolerable pH | 2–12 | 2–12 | 2–12 |
| Recommended pH | 6–9 | 6–9 | 6–9 |
| Maximum TMP | 35 kPa | 35 kPa | 35 kPa |
| Ultimate TMP | 65 kPa | 65 kPa | 65 kPa |
Modules of one model can be built into racks with different module counts. Dry-fiber packaging weight is approximate (about 200 g). Flux depends on the mixed liquor, temperature, and the rest of the operating environment. Peel strength of a single fiber is at least 1.5 MPa. The manual states that, at the same pressure difference, operating flux is 40% higher than the comparison it describes. Service life of the curtain fiber is given as 5 to 8 years under normal service.
How the series is used
- Municipal sewage, industrial wastewater, and pretreatment ahead of a tighter membrane are the duties this section is written for.
- Curtain modules are selected by area and tank geometry. Send the basin dimensions with the inquiry.
- Material, pore description, and any strength figure are quoted from the manual text for this section, not copied from another series.
What to send with the quotation
- Wastewater type and any discharge or reuse standard you must meet.
- Design capacity in m³/d, and whether the flow is steady or seasonal.
- Temperature, suspended solids, and, for NF or RO, salinity.
- Whether you need modules only, a packaged plant, or a system package with commissioning.
